Topsflo TD5 Solar DC Circulation Pump
Finally an affordable full Stainless Steel Solar Circulation Pump!!
This pump has been designed to provide versatility and performance not available in any other high temperature DC operated pump. It can be powered from any fixed (6V - 24V) source or directly from a PV Solar Panel. The power level can be manually selected or the pump can automatically optimize power draw from a PV panel for maximum flow rate using advanced MPPT (maximum power point tracking) technology.
When powered from fixed sources it is suitable for a host of applications in cars, boats, and RV's that require high temperature and pressure capability. In Solar Water Heating systems this pump can be connected directly to a PV panel eliminating the need for any controllers and sensors.
This pump fully complies with the new Federal "Lead Free Plumbing" laws!
Areas of Use:
- Solar Water Heating Systems
- Hot Water Circulation
- Radiant Floor Heating
- Heat Transfer Applications
- Cooling Systems
- Food Grade Liquid Transfer
- General High Temperature/Pressure Pumping
Main Features
- Full Stainess Steel Pump - Can Run With Hot Water (230o F) and at High Pressure (145 psi)
- Selectable Power Level or full MPPT power optimization
- Brushless and Sealless, nothing to wear out
- Advanced Magnetic Drive Technology
- Durable Permanent Magnet Rotor with Ryton Impeller
- Full Stainless Steel Pump Housing
- Ceramic Shaft
- Designed for Continuous Operation, Rated for 30,000 hours
- All Food Grade Materials
- Whisper Quiet Operation, less than 45dB
- 1/2" NPT (US Standard) Threads on both Sides
Built-In Protective Functions
- Drive Circuitry will sense dry operation and shut down to prevent damage
- Will slow operation or stop completely when an overtemperature condition is detected. This can arise due to excessive fluid temperature or excessive ambient temperatures. The pump will automatically recover when temperatures return to a safe level.
- Protected against overload conditions, such as can arise if the impeller is stuck due to debris.
- Will detect overvoltage condition and shut down when voltage exceeds 28V. Will recover automatically when voltage falls below threshhold.
Materials
- All Wetted Parts are Food Grade
- Stainless Steel Pump Housing
- Ryton Impeller
- Viton “O” Ring
- Ceramic Ferrite Magnet
Technical Specs
Power Level (Selectable) 5W, 10W, 15W, 25W, MPPT
Voltage Range 6V-24V
Nominal Operating Voltage 17V
Maximum Fluid Temperature 230ºF
Maximum Fluid Pressure 145 psi
Operating Noise ≤ 45dB
Minimum Start-Up Power 2 Watts
Maximum Head 14 ft.
Maximum Flow Rate 5 gpm
FREE SHIPPING within the USA
For INTERNATIONAL Shipping please select the international shipping option and enter your country
Information Downloads: